LawnEdge Canada
Company
Shop By Category
T&Cs
Shop Online
  • Every edging material in one place, plastic to corten steel
  • Free delivery across Canada on orders of $100 or more
  • Cut to the metre on the per metre edging, no minimum order
  • Fits with ordinary garden tools, no landscaper needed

Manual Lawn Edging Tool | Garden Bed Edger Tool | Grass Manual Edger

Manual Lawn Edging Tool

$59.99
  • Edge standing up
  • Slices through dense turf
  • The tool to use before the edging
  • Wide footplate, rubber handle

Price: $59.99

  • Delivery time: up to 7 working days by tracked courier, after dispatch within 2 working days
  • Free delivery across Canada on orders $100+, otherwise a flat $30
  • Pay by card or PayPal, handled by the payment provider
  • 15 days to change your mind, plus your statutory rights
Product specifications
TypeLong handled manual lawn edger
BladeSerrated spring steel, half moon profile
Design20 cm (8 in) footplate above the blade
Length104 cm (41 in), for use standing upright
HandleRubber grip, stainless steel screws
Best forCutting the spade line before laying steel or plastic edging
Also used forSidewalk borders, small trenches and re cutting lawn edges each spring
Not aPowered edger, this is a manual tool
Weight104 cm (41 in) long
Shipping & returns

Tracked delivery anywhere in Canada. It is free on orders of $100 or more, and a flat $30 below that. Standard delivery takes 2 working days handling plus up to 7 working days transit (2 handling + 7 transit). Express costs $30 and takes 1 working day handling plus 3 to 5 working days transit.

You have 15 days from delivery to request a change-of-mind return. Return goods in resaleable condition. We refund the price and standard delivery; you pay return postage unless the item is faulty.

If it arrives faulty, damaged or not as described, we put it right at no cost to you under your province's consumer protection law, return postage included.

Shipping details · Refunds and returns

Looking after it

Scrape soil off the blade after use and keep it dry. A wipe of oil on the blade over winter stops surface rust. Sharpen the edge occasionally with a file.

Edge standing upAt 104 cm (41 in) long with a 20 cm (8 in) footplate, there is no kneeling. Your weight does the cutting.
Slices through dense turfA serrated spring steel half moon blade bites into turf and cuts a clean line.
The tool to use before the edgingCut the line first, then set your plastic or steel edging against the clean face. Fitting goes much faster.
Wide footplate, rubber handleA 20 cm (8 in) footplate for your boot and a rubber handle for your hands. Stainless steel screws hold it together.

Cuts the line you are going to lay the edging against.

A 104 cm (41 in) half moon edger with a serrated spring steel blade and a 20 cm (8 in) footplate, so the whole job happens standing up.

Every metal edging job starts with a clean vertical cut in the turf, and this is the tool that makes it.

The blade is a half moon on a long handle with a 20 cm (8 in) footplate, so you place it, put your weight on the step, and the blade goes through the turf in one movement.

The 104 cm (41 in) length is the difference between an afternoon's work and an afternoon on your knees.

The serrated spring steel blade bites into dense, matted turf that a border spade tends to tear rather than slice.

It also cuts sidewalk borders and small trenches, not just bed edges.

Manual Lawn Edging Tool

Nearly every failed edging installation traces back to the same thing: the line was not cut properly first.

Manual Lawn Edging Tool

A wandering, ragged cut means the strip cannot sit tight against a vertical face, so it leans, and once it leans the soil behind it settles and the run goes wavy. On steel, which is stiff enough to bridge a bad cut rather than follow it, this is even more obvious.

Manual Lawn Edging Tool

A dedicated edger cuts that line better than a spade for two reasons. The blade is a shallow arc rather than a wide rectangle, so it follows a curve instead of chording across it. And the footplate puts your body weight directly over the blade rather than at the end of a lever.

Manual Lawn Edging Tool

The long handle is the part people notice afterwards. Cutting twenty metres of line with a hand tool means twenty metres of kneeling. Standing up to do it changes what is reasonable to attempt in a day.

It has a second life after the edging is in. Run it along an established lawn edge each spring and the line goes back to crisp without touching the edging itself.

Not sure yet? That is fine.

You can change your mind. We give you 15 days from delivery to cancel for any reason, then send it back in resaleable condition. We refund the price you paid, including standard delivery.

If it turns up faulty, damaged or not as described, that is on us. Your province's consumer protection law covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.

Frequently Asked Questions

What does a manual lawn edging tool do?

It cuts a clean vertical line in turf. That line is what edging seats against, and it is also how you re cut an established lawn edge to make it crisp again.

Do I need one if I am fitting plastic edging?

Strongly recommended. Even the plastic kit needs a vertical face to sit tight against. Without one the strip leans and the run goes wavy over time.

How is it different from a spade?

Two things. The blade is a shallow arc, so it follows a curve rather than chording across it, and the 20 cm (8 in) footplate puts your weight directly over the blade instead of at the end of a lever.

Do I have to kneel to use it?

No, and that is the main reason to own one. At 104 cm (41 in) long, the whole job is done standing upright.

What is the blade made from?

Serrated spring steel. The serrations help it bite into dense matted turf rather than tearing it.

Does it arrive assembled?

The parts fit together with stainless steel screws. Assembly is straightforward.

Is it powered?

No. This is a manual tool. There is nothing to charge, fuel or service.

Can it cut through roots?

It handles turf and fine roots. A substantial tree root needs loppers or a saw: forcing an edger through one damages the blade.

Will it work in dry, hard ground?

It is much easier the day after rain. In a dry summer, water the line the evening before and the work halves.

Can I use it on a curve?

Yes, and it is better at curves than a spade. Take smaller bites through the curve so the arc of the blade can follow the line.

How do I keep the blade sharp?

A few strokes with a flat file along the edge when it stops slicing cleanly, following the serrations. A sharp edger cuts turf, a blunt one tears it, and the difference in effort is considerable.

How should I store it?

Scrape the soil off, especially in clay, and keep it dry. A wipe of oil on the blade before winter prevents surface rust.

How long does it take to cut a line?

Once the line is marked, most people manage a good few metres a minute in reasonable ground. The marking out usually takes longer than the cutting.

Is it the same as your half moon shovel?

No, they are two different edgers. This one is 104 cm (41 in) long with a serrated spring steel blade and a 20 cm (8 in) footplate. The half moon shovel is about 102 cm (40 in) tall with a 13 cm (5 in) deep blade, a 15 cm (6 in) footplate and a padded T-grip.

Can I use it to lift turf?

It cuts turf well and will lift small sections. For lifting a large area, a turf lifter or a flat spade is the better tool.

Will it damage my edging if I use it after installation?

Run it on the lawn side, a little back from the edging, rather than against it. Driving a steel blade onto a steel strip will mark both.

Is it heavy?

It has enough weight to do the work, which is what you want. The footplate means the effort comes from your body weight rather than your arms.

Can I use it on a slope?

Yes. Stand on the uphill side and work across the slope rather than down it, which is both safer and gives a more even cut.

Does it work on artificial grass?

No. It is designed for cutting soil and turf. Cutting artificial grass wants a sharp knife and a straight edge.

What else do I need for an edging job?

This to cut the line, a rubber mallet to drive the spikes, gloves, and a kneeling pad for the backfilling. We sell all four.

Is it suitable for a professional landscaper?

For cutting lines on residential jobs, yes. On large commercial sites most contractors move to a powered edger for speed.

Can it edge around a tree?

Yes, and the curved blade is what makes a tree ring achievable by hand. Take small bites all the way round.

How often should I re cut my lawn edge?

Once a year, in spring, keeps most lawns crisp. A vigorous lawn on good soil may want a second pass in high summer.

Does it come with a guarantee?

Your rights under the consumer protection laws of your province or territory apply. Contact us if goods are faulty, damaged or not as described so we can arrange the appropriate repair, replacement or refund, including return postage where required. Our change-of-mind policy does not limit these rights.

Can I return it if I change my mind?

Yes. You have 15 days from delivery to change your mind. It needs to come back unused and in resaleable condition.

What if it arrives damaged?

Send us your order number and a photograph and we will replace it or refund you, and we pay the return postage.

How much is delivery?

Free across Canada on orders of $100 or more, and a flat $30 below that. Every order is sent tracked.

Can I sharpen it myself or does it need a service?

Sharpen it yourself with a file. There is nothing on this tool that needs professional servicing.

Will it cut through matted, neglected turf?

That is what the serrated blade is for. Neglected turf is dense rather than hard, and a sharp blade with your weight behind it goes through it.

Do I need it if I already own a border spade?

You can cut a line with a border spade, particularly a straight one. Where this wins is curves, and not having to kneel. On a long or shaped run that difference is the whole job.

Cutting a clean edge line

4 min read LawnEdge Canada

Why the cut matters more than the edging

People buy edging and then wonder why the finished run looks slightly wrong. Nine times out of ten the edging is fine and the line it is sitting in is not.

A strip needs a vertical face to sit against. If the cut is sloped, ragged or wandering, the strip leans, and a leaning strip lets the soil behind it settle and slump. Steel makes it worse, because it is stiff enough to bridge a bad cut rather than follow it, so every deviation shows as a kink.

Ten minutes with the right tool at the start saves an afternoon of trying to correct it later.

Using it

Mark the line first. A hose laid on the grass is the easiest way, and it lets you look at the shape before you commit.

Stand on the lawn side, place the blade on the line, and step down on the footplate. Your weight does the work, not your arms. Move a blade width along and repeat.

On a curve, take smaller bites. The arc of the blade is what lets it follow a curve, but only if you are not trying to cover too much per cut.

Work back along the line and lift out the cut strip of turf. What you should be left with is a clean vertical face on the bed side.

Then the edging

Seat the strip tight against that vertical face, peg it, and backfill. Because the face is clean, the strip sits upright without being held there.

Keeping the blade good

Scrape the soil off after use, especially in clay. Store it dry.

A few strokes with a file when the blade stops slicing cleanly makes an enormous difference: a sharp edger cuts turf, a blunt one tears it. Over winter, wipe the blade with oil.

Two edgers, two pages

This and our half moon shovel are two different edgers. This one is 104 cm (41 in) long with a serrated spring steel blade and a 20 cm (8 in) footplate. The half moon shovel is about 102 cm (40 in) tall with a 13 cm (5 in) deep blade, a 15 cm (6 in) footplate and a padded T-grip.

Browse the shop

Get the edge right first time

Not sure which material suits your ground, or how many metres a curved bed needs? Ask before you order. Free delivery across Canada on orders over $100.

Ask us a question

Page summary

Manual Lawn Edging Tool sold by LawnEdge Canada at lawnedge.net. A 104 cm (41 in) manual half moon lawn edger with a serrated spring steel blade, a 20 cm (8 in) footplate, a rubber handle and stainless steel screws, so the user's body weight is applied directly over the blade and the work is done standing upright rather than kneeling. Its main purpose is cutting the clean vertical line in turf that metal or plastic edging is then seated against, which is the step most failed installations skip; the shallow arc blade follows a curve rather than chording across it the way a rectangular spade does. It also cuts sidewalk borders and small trenches, and re cuts established lawn edges each spring. It is a manual tool, not a powered edger. Care: scrape soil off after use, keep dry, oil the blade over winter and sharpen occasionally with a file. Full 15 day change of mind window. Delivery Canada wide, free at CAD 100 or more and otherwise CAD 30.